Medium Hinged Back Box Blades

The Medium Hinged Back Box Blades have 3/8 plate hitch, 3/8' thick end plates and 1/4" thick back plate. The rear blade is hinged. Cat. I & Cat. II 3-Point Hitch. (clevis type).

View Details

Standard Duty & Lt Box Blades

Standard Duty Box Blade has 1/4" end plates and back plate. Reversible 1/2" x 6" high carbon steel cutting edge. Lt Box Blade has end plates and back plate are made of 3/16" steel.

View Details

Heavy Duty Box Blades

Heavy Duty Box Blade has 3'8" thick back plate and 1/2" thick end plates. Reversible front and rear cutting edges. The shank bars are 4" deep to help reinforce the scarifier shanks.

View Details

Hydraulic Box Blades

For Commercial Work and Serious Dirt Movers. Rear Blade Floats or Locks Stationary, Complete with Cylinder and Hoses, Cat. I & Cat. II Hitch and Cat. I & Cat. II Quick Hitch.

View Details

Chain Harrows & Carriers

With Flexible 2 way design. Front and Back Pull Bars 2 - 7/8" x 1/4" Wall Pipe. Mats are 5/8" Round Stock. Heat Treated. All Pull Bars and Chain Splices are attached with quick links for tangle free operation. Complete with Pull Chain and Clevis.

View Details

3 Pt. Rear Angle Blade & 3 Pt. Rear Tilt/Angle Blade

Rear Angle Blades are reversible for use in dragging and pushing. 1/2 x 6" high carbon blade is also reversible. Cat. I Hitch. 2 1/4" pivot shaft.

View Details

Landscape Rakes

These rakes have the same heavy duty hitch as out rear blades. Quick angle adjustment with pull of pin. (Reversible for drag or push.) High carbon steel bolt on times.

View Details

Super Heavy Discs

Heavy duty grease able bearings on 1-1/2" square axle. Ductile iron spacers for extreme toughness. Easy pin angle adjustments (no tools or cranking). Notched blades are 5mm thick x 22" on 9" centers.

View Details

Heavy Duty Pull Type Discs

Heavy duty grease able bearings on 1-1/2" square axle. 11Lx16" Flotation Tires, Jack, Cylinder & Hoses Included. Optional Scrapers & Center Sweep Available.

View Details

Heavy Duty Discs

Heavy Duty 3-Point Discs are fully adjustable with quick pull pins. Built with heavy channel and square tubing frame that is designed to give years of dependable service.

View Details

Medium Disc - 3 Point

Rigid angle iron and rectangular tube frame. Adjustable cutting angles. Grease able ball bearings on 1" square axle. 7 1/2 disc spacing.

View Details

Pasture Renovator

Heavy 4" sq. tube frame. Each shank is shear bolt protected. 17" Fluted Coulters Shanks - 3/4" x 2 1/2" on 15" center

View Details

3-Point Lift Boom

3 Point Lift Boom is built from 2-7/8” diameter pipe. The 3-point lift can carry a load up to 800 lb. max. The lift weighs 60 lbs.

View Details

3-Point Seeder / Spreader

2 models : Painted and Galvanized, 3-Point Hitch, PTO Driven. It has a 500 lb capacity.
Maximum spread width is up to 52'.

View Details

3-Point Model 1500 Spear & 3-Point Model 2000 Fork

3-point spear has a 2-1/4" in diameter 48" long center spear that is tapered for easy entry into the bale. The two 1-1/2" stabilizer spears keep the round bale stationary on the center spear. Heavy duty 3-Point fork is designed for many years of trouble free use. Over 10,000 of these units are currently in use. Available in category I or II 3-point hitch.

View Details

Front End Loader Spear - Model 2500 & Model 3500

Available with adjustable brackets or with brackets for loaders with quick attach buckets. (QA)
Sturdy enough to carry 2000 lb.

View Details

Front End Loader Spear - Model 4500 & Model 5500

Designed to safely load and stack large square bales. It is available with adjustable brackets or with brackets for loaders with quick attach buckets.

View Details

Tool Bar Package

Includes Tool Bar, Bedders, and Sweeps.

View Details

Flip-Over Disc

8 - Notched Blades 16" Diameter, 2" Ball Hitch * 16" Flotation Tires.

View Details

Pallet Forks

With quick attach options for skid, JD4/5, JD6/7, BH-M, BH, Euro, Massey hook or pin.

View Details

Quick Hitch

Cat. I & Cat. II Quick Hitch

View Details