CHISEL PLOW

• ArmstrongAg's  chisel plow is constructed of 4 inch square tubing.
• Adjustable spring steel shanks.
• 22 in clearence.
• Avaliable chisel points or 8 inch chisel sweeps.
• 1 inch u-bolts on shank clamp.
• Gauge wheels optional.
• Customize your own by choosing 60,90,120 or 150 inch wide frames.
• Your choice of spacing  and number of shanks.

MD- 3-POINT MEDIUM DUTY DISC HARROW

Avalible in 4',5' and 6.5' widths

• ArmstrongAg's 3-Point Medium Duty Disc Harrow has a rigid angle iron and rectangular tube frame
• Adjustable cutting angles with greasable ball bearings on a 1" square axle
• 7 1/2" disc spacing
• Available in Category I - 3-point Hitch, Cat. I - Quick Hitch Compatible

HD - 3-POINT HEAVY DUTY DISC HARROW

Available in 5', 6.5',8' and 9' widths .

• ArmstrongAg's 3-Point Heavy Duty Discs are fully adlustable with quick pull pins
• Built with heavy channel and square tubing frame that is designed to give years of dependable service
• Notched disc provides aggressive cutting
• Sealed bearings on a 1 1/8" square axle, with 7 1/2" disc spacing and cast steel spools
• Disc Scrapers are available on 6.5',8' and 9' disc.
•  

HD-P PULL TYPE DISC

Avaliable in 6.5,8' and 9' widths 

• Heavy square tube frame with adjustable gangs
• Sealed roller bearings, HD-P 2820 has 12 bearings
• New 15" tires on Ag Rims
• Comes with 3 X 8 cylinder and hoses
• Disc scrapers avaliable for all sizes

DHD - 3-POINT SUPER HEAVY DUTY DISC HARROW     

Avaliable in 8' and 10' widths.

• 3-Point Super Heavy Duty Disc Harrow has heavy duty greasable bearings on a 1 1/2" square axle
• Ductile iron spacers for extreme toughness
• Easy pin angle adjustments. (no tools or cranking)
• Notched or Smooth blades are 5mm thick X 22" on 9" Centers
• Available in Category II & III - 3-point Hitch
• HP Rating - 80-150 HP
• Optional scrapers and center sweep.

DHDP - HEAVY DUTY (PULL TYPE) DISC HARROW

Available in 8',10',12',13.5' and 15' widths .

• Heavy Duty Pull Type Disc Harrow has heavy duty greasable bearings on a 1 1/2" square axle
• Ductile iron spacers for extreme toughness
• Easy pin angle adjustments (no tools or cranking) 
• Notched or Smooth blades are 5mm thick X 22" on 9" Centers
• 11L x 15 flotation tires, jack, cylinder & hoses included 
• Optional Scrapers & Centers Sweep are Available

DHO - HEAVY DUTY (PULL TYPE) OFFSET DISC 

Available from  6' to 14'  widths .

• Heavy Duty Pull Type Offset Disc has heavy duty greasable bearings on a 1 1/2" square axle
• Notched or Smooth 24" X 6MM
• Blades on 9" Centers
• Adjustable Hitch for Plow Alignment
• 11Lx15 flotation tires, jack, cylinder & hoses included
• Scrapers Optional

ARMADILLO - PASTURE RENOVATOR

• Pasture Renovator has heavy 4" square tube frame
• Each shank is shear bolt protected
• 17" flutted coulters, 3/4" U-Bolts on coulter clamp,
•  New clamp on design 1" U-Bolts on shank clamp
• ARM3, ARM4, ARM5, ARM6 Available in Category I & II - 3-point Hitch (Clevis Type), Cat. I & II - Quick Hitch Compatible
• ARM8 & ARM10 - Available in Category II & III, 3 Pt. Hitch (Clevis Type)10HP - 15 HP per Shank

RV - ROLLAVATOR

Available in 6',8',10',12' and 15' widths 

• ArmstrongAg's Rollavator is a Rolling Aerator with Tines that Penetrate and Shatter Compacted Soils
• Sealed greasable bearings with easy adjustable gang arms allow for more aggressive plowing
• Cement Weight Boxes (860lbs each)  are recommended for Greater Penetration
• 6-10 HP per foot and Tine Spacing - 7 1/2"
• 3x8 Cylinders
• 3'' axel shaft 
• pull type or 3 pt 
• 11L x 15 Tire - 10 ply

CH -CHAIN HARROW

AVAILABLEin 4',8',12'and16'widths

• ArmstrongAg's Chain Harrows have a flexible 2 way design, front and back pull bars
• CH mats are 5/8" heat treated round stock, 2" x 7/8" Wall Pipe
• Depth - Bar to Bar - approximatley 6 1/2'
• All pull bars and chain splices are attached with quick Links for tangle free operation 
• Complete with pull chain and clevis. Will attach to CHC 

CHC - CHAIN HARROW CARRIERS 

Used on  4',8',12'and 16' chain harrows

• Chain Harrow Carriers are great for arenas or transporting
• CHC weighs approximately 220 lbs
•  Cat 1 & 2 combination pins 

FD - FLIP-OVER DISC

• Flip-Over Disc Harrow for ATV's and lawn & garden tractors
• 8 - 16" diameter notched blades
• 2" ball hitch and 16" flotation tires
• Flip-Over Disc weighs approximately 315 lbs.

*DO NOT PULL ON PUBLIC ROADS

SDRP - 3-POINT PLASTIC SEEDER

• 3-Point Plastic Seeder is designed with a high quality plastic UV resistant cone
• Aluminum housing gearbox
• Powder coated frame
• 500lb capacity (Driveline Included)